top of page

Social Group

Public·167 members
Josiah Miller
Josiah Miller

Mvci Driver For Toyota Msi Zip

How to Install MVCI Driver for Toyota Techstream on Windows 10 64bit

If you are looking for a way to connect your Toyota, Lexus or Scion vehicle to your laptop and use Techstream software, you may need to install the MVCI driver for Toyota TIS. This driver allows your Mini VCI J2534 cable, which is a OBDII to USB dongle, to communicate with your vehicle and Techstream software. However, installing the MVCI driver on Windows 10 64bit system can be tricky and confusing. In this article, we will show you how to download, install and activate the MVCI driver for Toyota Techstream on Win10 64bit step by step.

mvci driver for toyota msi zip


Step 1: Download the MVCI Driver for Toyota TIS

The first thing you need to do is to download the MVCI driver for Toyota TIS from a reliable source. You can use the link below, which is 100% tested and safe, or you can use your own Mini-VCI CD if you have one. The link below contains the following files:

  • Mini VCI driver (x64 & x86)

  • Techstream older version 12.20.024, 13.00.022

  • Techstream V16.00.017

  • Techstream Patch

  • Installation video

The link is:

After you download the file, extract it to your desktop or any folder you prefer.

Step 2: Install Techstream Software and Framework

The next step is to install the Techstream software and the framework that it requires. You can use any version of Techstream that you like, but we recommend using the latest version V16.00.017, which supports vehicles from 1996 to 2022. To install Techstream software and framework, follow these steps:

  • Open the Techstream V16.00.017 folder and run Techstream_Setup_V16.00.017.exe.

  • Follow the InstallShield Wizard and accept the license agreement.

  • Enter user name: 123 and Company name: 567, then press Next to continue.

  • Press Install until finished.

  • Install NET Framework 4.7.2 by following the prompts and accepting the license terms.

Step 3: Install MVCI Driver and Set COM Port

The third step is to install the MVCI driver and set the COM port for your Mini VCI cable. This step is crucial for making sure that your cable can work with Techstream software and your vehicle. To install MVCI driver and set COM port, follow these steps:

  • Install MVCI driver for 32bit or 64bit system, depending on your system type. Here we install driver for 64bit system.

  • Open the driver folder and extract Driver

  • Run Driver MVCI x64.exe and select destination folder.

  • Select create a desktop icon and press Install.

  • Finish install MVCI driver.

  • Run MVCI MultiDriverX64 on desktop as Administrator.

  • Select firmware version 1.4.8 and press Install.

  • Plug in your Mini-VCI cable and wait for windows to recognize it and load the drivers.